ATS-Controllers

AMF Controllers

[mvc_flip_box border_st=”custom_border” border_style=”double” descrsize=”15px” image_id=”663″ title=”ATS – 105″ border_clr=”#1e73be”]

ATS – Automatic Transfer Switch

are designed to monitor the AC Mains supply for under / over voltage, under / over frequency and voltage unbalance and provide a start command on detection of mains failure. ATS-105 or ATS-115

[/mvc_flip_box]

[mvc_flip_box image_id=”664″ title=”ATS – 115″]

ATS – Automatic Transfer Switch

are designed to monitor the AC Mains supply for under / over voltage, under / over frequency and voltage unbalance and provide a start command on detection of mains failure. ATS-105 or ATS-115

[/mvc_flip_box]

[mvc_flip_box image_id=”667″ title=”GC – 250″]

AMF – Automatic Mains Failure

Mains Circuit Breaker (MCB) control
Genset Circuit Breaker (GCB) control
Engine and alternator protections monitoring (AMF)
Remote start control and date / time sheduler
Models of genset controllers: GC-250 / GC-315 / GC-360

[/mvc_flip_box]

[mvc_flip_box image_id=”668″ title=”GC – 315″]

AMF – Automatic Mains Failure

Mains Circuit Breaker (MCB) control
Genset Circuit Breaker (GCB) control
Engine and alternator protections monitoring (AMF)
Remote start control and date / time sheduler
Models of genset controllers: GC-250 / GC-315 / GC-360

[/mvc_flip_box]

Synch & Load Share Controllers

[mvc_flip_box image_id=”687″ title=”GC – 400 Main”]GC-400
Entry level Synchro/Parallel controller perfect for rental gensets too. GC-400 is well recommended in case of Multiple Prime Mover or Multiple Stand-By power stations. In this last case an external logic (i.e. ATS-115) is required for the detection of the mains failure and the signal of start/stop to the stand-by gensets.

[/mvc_flip_box]

[mvc_flip_box image_id=”930″ title=”MC – 400″]MC-400
The MC400 controller is used were one or more mains supplies are required to parallel with the GC400 generator bus.

[/mvc_flip_box]

[mvc_flip_box image_id=”689″ title=”GC – 600, GC – 600 Main”]GC-600 and GC-600 Main
New Powerful Synchro/Parallel controller for Island mode and Mains parallel functions with integrated PLC operations. Enhanced colour display as standard. Huge set of communication serial ports on board. Available in different versions in coherence to the type of the plant.

[/mvc_flip_box]

[mvc_flip_box image_id=”931″ title=”MC – 200″]MC-200

The MC200 controllers is used were one or more mains supplies are  required to parallel with  the generator bus, it also features a powerful PLC to ensure site specific design details can be accommodated. A large full colour display presents operating status in a clear easy to view format. A generous input and output capability with the ability to add expansion where needed, means complex sites can be tackled with ease.

[/mvc_flip_box]

[mvc_flip_box image_id=”690″ title=”DST – 4602 Evolution”]When the load is supplied by several gensets connected on a bus and working in parallel, we talk about SYNCHRO/PARALLEL applications. For example big factories, hospitals, data center need more then one genset able to supply the load in case of mains failure. Additionally, in case of desert plants where the mains is not available, it’s required the power of several gensets in order to supply the load.

 

 

[/mvc_flip_box]

[mvc_flip_box image_id=”932″ title=”BTB – 200″]BTB-200

The BTB200 controller provides the ability to control a bus tie breaker, for applications were it is necessary to divide the common bus during certain operating conditions. A large full colour display makes presents operating status in a clear easy to view format. Combined with generous input and output capability with the ability to add expansion where needed, means complex sites can be tackled with ease.

[/mvc_flip_box]

[mvc_flip_box image_id=”933″ title=”DST – 4602 Remote”]DST-4602 REMOTE

An additional remote display and control location for DST4602 Evolution controllers. Up to 5 remote locations can be fitted to the DST4602 Evolution controller.

[/mvc_flip_box]

[mvc_flip_box image_id=”934″ title=”D – Monitor”]D-MONITOR

Full colour touch screen for visualisation of the controller. Particularly suitable fo Co-Generation (CHP) plants where it is required to visualise and control both electrical and thermal performance of the system.

[/mvc_flip_box]

SCADA & Generator Remote Monitoring

[mvc_flip_box image_id=”936″ title=”SICES SUPERVISOR 3″]

SICES SUPERVISOR 3

System monitoring and SCADA PC software. Allows monitoring of the power generation plant either locally or remotely. The fully configurable software allows the user to view the plant single line diagram, control the operation of breakers and generating sets. Alarm monitoring, diagnostics and trends can be reviewed to streamline operations and aid fault finding.

[/mvc_flip_box]

[mvc_flip_box image_id=”937″ title=” SI.MO.NE”] SI.MO.NE

Cloud based monitoring system using Ethernet or GPRS connection from remote equipment. Suitable for monitoring of rental fleets, Co-generation (CHP) installations or other widely distributed plans.

[/mvc_flip_box]

[mvc_flip_box image_id=”938″ title=”Rewind/Dance”]Rewind/Dance

GPRS/GPS and GPS interface module for the communication with the monitoring SIMONE and SICES Supervisor.

[/mvc_flip_box]

Accessories

I/O Expansion Modules
[mvc_flip_box image_id=”939″ title=”DITEL”]DITEL

16x Input and 8x Output (1AC/O) expansion module for use with supported SICES controllers.

 

[/mvc_flip_box]

Battery Chargers
[mvc_flip_box image_id=”940″ title=”B.C Switching2.5A – 5A”]

B.C Switching2.5A – 5A

Switching battery charger Ver. 2,5A/24V and 5A/12V and Ver. 5A/24V.

[/mvc_flip_box]

[mvc_flip_box image_id=”942″ title=”B.C. FULL Type 5A – 10A – 15A – 20A”]

B.C. FULL Type 5A – 10A – 15A – 20A
Traditional battery charger equipped with transformer for Ni-cd batteries.

 

 

[/mvc_flip_box]